IE (Ireland) Core Implementation Guide
1.0.0-ballot - Ballot Ireland flag

Publication Build: This will be filled in by the publication tooling

Resource Profile: IECoreADIDocumentReferenceProfile - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 3

Definitions for the ie-core-adi-documentreference resource profile.

Guidance on how to interpret the contents of this table can be found here

0. DocumentReference
Must Supportfalse
2. DocumentReference.extension
SlicingThis element introduces a set of slices on DocumentReference.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. DocumentReference.extension:authenticationTime
    Slice NameauthenticationTime
    ShortAuthentication Time"
    Control0..1
    TypeExtension(IE Core Authentication Time Extension) (Extension Type: dateTime)
    Must Supporttrue
    6. DocumentReference.identifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Must Supporttrue
    8. DocumentReference.status
    BindingThe codes SHALL be taken from DocumentReferenceStatus
    (required to http://hl7.org/fhir/ValueSet/document-reference-status)
    Must Supporttrue
    10. DocumentReference.type
    Control1..?
    BindingUnless not suitable, these codes SHALL be taken from IE Core Advance Directives Content Type
    (extensible to http://iehr.ai/fhir/ie/core/ValueSet/ie-core-advance-directives-content-type)

    Advance Directives Content Type

    Must Supporttrue
    12. DocumentReference.category
    Control1..?
    Must Supporttrue
    SlicingThis element introduces a set of slices on DocumentReference.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • pattern @ $this
    • 14. DocumentReference.category:adi
      Slice Nameadi
      ShortCategorization of ADI document"
      Control0..*
      BindingThe codes SHALL be taken from IE Core Advance Healthcare Directive Categories Grouper
      (required to http://iehr.ai/fhir/ie/core/ValueSet/ie-core-advance-healthcare-directive-categories-grouper)

      Advance Healthcare Directive Categories Grouper. Note that other codes are permitted, see Required Bindings When Slicing by Value Sets

      Must Supporttrue
      16. DocumentReference.subject
      Control1..?
      TypeReference(IE Core Patient Profile, Practitioner, Group, Device)
      Must Supporttrue
      Must Support TypesReference(IE Core Patient Profile)
      18. DocumentReference.date
      Must Supporttrue
      20. DocumentReference.author
      TypeReference(IE Core Practitioner Profile, IE Core Organization Profile, IE Core Patient Profile, IE Core PractitionerRole Profile, IE Core RelatedPerson Profile, Device)
      Must Supporttrue
      Must Support TypesReference(IE Core Practitioner Profile)
      22. DocumentReference.authenticator
      TypeReference(IE Core Practitioner Profile, IE Core Organization Profile, IE Core PractitionerRole Profile)
      Must Supporttrue
      Must Support TypesReference(IE Core Practitioner Profile)
      24. DocumentReference.content
      Must Supporttrue
      26. DocumentReference.content.attachment
      Definition

      The document and format referenced.

      Comments

      If there are multiple DocumentReference.content element repetitions, these SHALL all represent the same document in different format or attachment metadata. The content element SHALL NOT contain different versions of the same content. For version handling use multiple DocumentReferences with DocumentReference.relatesTo.

      Must Supporttrue
      Invariantsie-core-6: DocumentReference.content.attachment.url or DocumentReference.content.attachment.data or both SHALL be present. (url.exists() or data.exists())
      28. DocumentReference.content.attachment.contentType
      Must Supporttrue
      30. DocumentReference.content.attachment.data
      Must Supporttrue
      32. DocumentReference.content.attachment.url
      Must Supporttrue
      34. DocumentReference.content.format
      BindingUnless not suitable, these codes SHALL be taken from HL7 ValueSet of Format Codes for use with Document Sharing
      (extensible to http://terminology.hl7.org/ValueSet/v3-HL7FormatCodes)
      Must Supporttrue

      Guidance on how to interpret the contents of this table can be found here

      0. DocumentReference
      Definition

      A reference to a document of any kind for any purpose. Provides metadata about the document so that the document can be discovered and managed. The scope of a document is any seralized object with a mime-type, so includes formal patient centric documents (CDA), cliical notes, scanned paper, and non-patient specific documents like policy text.

      ShortA reference to a document
      Comments

      Usually, this is used for documents other than those defined by FHIR.

      Control0..*
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. DocumentReference.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      4. DocumentReference.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on DocumentReference.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 6. DocumentReference.extension:authenticationTime
        Slice NameauthenticationTime
        Definition

        When the information in the document was verified.

        ShortAuthentication Time"
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(IE Core Authentication Time Extension) (Extension Type: dateTime)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        8. DocumentReference.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        10. DocumentReference.identifier
        Definition

        Other identifiers associated with the document, including version independent identifiers.

        ShortOther identifiers for the document
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. DocumentReference.status
        Definition

        The status of this document reference.

        Shortcurrent | superseded | entered-in-error
        Comments

        This is the status of the DocumentReference object, which might be independent from the docStatus element.

        This element is labeled as a modifier because the status contains the codes that mark the document or reference as not currently valid.

        Control1..1
        BindingThe codes SHALL be taken from DocumentReferenceStatushttp://hl7.org/fhir/ValueSet/document-reference-status|4.0.1
        (required to http://hl7.org/fhir/ValueSet/document-reference-status)
        Typecode
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. DocumentReference.type
        Definition

        Specifies the particular kind of document referenced (e.g. History and Physical, Discharge Summary, Progress Note). This usually equates to the purpose of making the document referenced.

        ShortKind of document (LOINC if possible)
        Comments

        Key metadata element describing the document that describes he exact type of document. Helps humans to assess whether the document is of interest when viewing a list of documents.

        Control10..1
        BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from IE Core Advance Directives Content Typehttp://hl7.org/fhir/ValueSet/c80-doc-typecodes
        (extensible to http://iehr.ai/fhir/ie/core/ValueSet/ie-core-advance-directives-content-type)

        Advance Directives Content Type


        Precise type of clinical document.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. DocumentReference.category
        Definition

        A categorization for the type of document referenced - helps for indexing and searching. This may be implied by or derived from the code specified in the DocumentReference.type.

        ShortCategorization of document
        Comments

        Key metadata element describing the the category or classification of the document. This is a broader perspective that groups similar documents based on how they would be used. This is a primary key used in searching.

        Control10..*
        BindingFor example codes, see DocumentClassValueSethttp://hl7.org/fhir/ValueSet/document-classcodes
        (example to http://hl7.org/fhir/ValueSet/document-classcodes)

        High-level kind of a clinical document at a macro level.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Alternate Namesclaxs
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on DocumentReference.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • pattern @ $this
        • 18. DocumentReference.category:adi
          Slice Nameadi
          Definition

          A categorization for the type of document referenced - helps for indexing and searching. This may be implied by or derived from the code specified in the DocumentReference.type.

          ShortCategorization of ADI document"Categorization of document
          Comments

          Key metadata element describing the the category or classification of the document. This is a broader perspective that groups similar documents based on how they would be used. This is a primary key used in searching.

          Control0..*
          BindingThe codes SHALL be taken from For example codes, see IE Core Advance Healthcare Directive Categories Grouperhttp://hl7.org/fhir/ValueSet/document-classcodes
          (required to http://iehr.ai/fhir/ie/core/ValueSet/ie-core-advance-healthcare-directive-categories-grouper)

          Advance Healthcare Directive Categories Grouper. Note that other codes are permitted, see Required Bindings When Slicing by Value Sets


          High-level kind of a clinical document at a macro level.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Alternate Namesclaxs
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          20. DocumentReference.subject
          Definition

          Who or what the document is about. The document can be about a person, (patient or healthcare practitioner), a device (e.g. a machine) or even a group of subjects (such as a document about a herd of farm animals, or a set of patients that share a common exposure).

          ShortWho/what is the subject of the document
          Control10..1
          TypeReference(IE Core Patient Profile, Practitioner, Group, Device, Patient)
          Is Modifierfalse
          Must Supporttrue
          Must Support TypesReference(IE Core Patient Profile)
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          22. DocumentReference.date
          Definition

          When the document reference was created.

          ShortWhen this document reference was created
          Comments

          Referencing/indexing time is used for tracking, organizing versions and searching.

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Alternate Namesindexed
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          24. DocumentReference.author
          Definition

          Identifies who is responsible for adding the information to the document.

          ShortWho and/or what authored the document
          Comments

          Not necessarily who did the actual data entry (i.e. typist) or who was the source (informant).

          Control0..*
          TypeReference(IE Core Practitioner Profile, IE Core Organization Profile, IE Core Patient Profile, IE Core PractitionerRole Profile, IE Core RelatedPerson Profile, Device, Practitioner, PractitionerRole, Organization, Patient, RelatedPerson)
          Is Modifierfalse
          Must Supporttrue
          Must Support TypesReference(IE Core Practitioner Profile)
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          26. DocumentReference.authenticator
          Definition

          Which person or organization authenticates that this document is valid.

          ShortWho/what authenticated the document
          Comments

          Represents a participant within the author institution who has legally authenticated or attested the document. Legal authentication implies that a document has been signed manually or electronically by the legal Authenticator.

          Control0..1
          TypeReference(IE Core Practitioner Profile, IE Core Organization Profile, IE Core PractitionerRole Profile, Practitioner, PractitionerRole, Organization)
          Is Modifierfalse
          Must Supporttrue
          Must Support TypesReference(IE Core Practitioner Profile)
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          28. DocumentReference.content
          Definition

          The document and format referenced. There may be multiple content element repetitions, each with a different format.

          ShortDocument referenced
          Control1..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          30. DocumentReference.content.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          32. DocumentReference.content.attachment
          Definition

          The document and format referenced.


          The document or URL of the document along with critical metadata to prove content has integrity.

          ShortWhere to access the document
          Comments

          If there are multiple DocumentReference.content element repetitions, these SHALL all represent the same document in different format or attachment metadata. The content element SHALL NOT contain different versions of the same content. For version handling use multiple DocumentReferences with DocumentReference.relatesTo.

          Control1..1
          TypeAttachment
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ie-core-6: DocumentReference.content.attachment.url or DocumentReference.content.attachment.data or both SHALL be present. (url.exists() or data.exists())
          34. DocumentReference.content.attachment.contentType
          Definition

          Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate.

          ShortMime type of the content, with charset etc.
          Control0..1
          BindingThe codes SHALL be taken from Mime Typeshttp://hl7.org/fhir/ValueSet/mimetypes|4.0.1
          (required to http://hl7.org/fhir/ValueSet/mimetypes|4.0.1)

          The mime type of an attachment. Any valid mime type is allowed.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          Processors of the data need to be able to know how to interpret the data.

          Example<br/><b>General</b>:text/plain; charset=UTF-8, image/png
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. DocumentReference.content.attachment.data
          Definition

          The actual data of the attachment - a sequence of bytes, base64 encoded.

          ShortData inline, base64ed
          Comments

          The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON.

          Control0..1
          This element is affected by the following invariants: ie-core-6
          Typebase64Binary
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summaryfalse
          Requirements

          The data needs to able to be transmitted inline.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. DocumentReference.content.attachment.url
          Definition

          A location where the data can be accessed.

          ShortUri where the data can be found
          Comments

          If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data.

          Control0..1
          This element is affected by the following invariants: ie-core-6
          Typeurl
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          The data needs to be transmitted by reference.

          Example<br/><b>General</b>:http://www.acme.com/logo-small.png
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. DocumentReference.content.format
          Definition

          An identifier of the document encoding, structure, and template that the document conforms to beyond the base format indicated in the mimeType.

          ShortFormat/content rules for the document
          Comments

          Note that while IHE mostly issues URNs for format types, not all documents can be identified by a URI.

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from HL7 ValueSet of Format Codes for use with Document Sharinghttp://hl7.org/fhir/ValueSet/formatcodes
          (extensible to http://terminology.hl7.org/ValueSet/v3-HL7FormatCodes)
          TypeCoding
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

          Guidance on how to interpret the contents of this table can be found here

          0. DocumentReference
          Definition

          A reference to a document of any kind for any purpose. Provides metadata about the document so that the document can be discovered and managed. The scope of a document is any seralized object with a mime-type, so includes formal patient centric documents (CDA), cliical notes, scanned paper, and non-patient specific documents like policy text.

          ShortA reference to a document
          Comments

          Usually, this is used for documents other than those defined by FHIR.

          Control0..*
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          2. DocumentReference.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

          Control0..1
          Typeid
          Is Modifierfalse
          Summarytrue
          4. DocumentReference.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. DocumentReference.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. DocumentReference.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHOULD be taken from CommonLanguages
          (preferred to http://hl7.org/fhir/ValueSet/languages)

          A human language.

          Additional BindingsPurpose
          AllLanguagesMax Binding
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. DocumentReference.text
          Definition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          TypeNarrative
          Is Modifierfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. DocumentReference.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

          Control0..*
          TypeResource
          Is Modifierfalse
          Summaryfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. DocumentReference.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on DocumentReference.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. DocumentReference.extension:authenticationTime
            Slice NameauthenticationTime
            Definition

            When the information in the document was verified.

            ShortAuthentication Time"
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(IE Core Authentication Time Extension) (Extension Type: dateTime)
            Is Modifierfalse
            Must Supporttrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. DocumentReference.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Summaryfalse
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. DocumentReference.masterIdentifier
            Definition

            Document identifier as assigned by the source of the document. This identifier is specific to this version of the document. This unique identifier may be used elsewhere to identify this version of the document.

            ShortMaster Version Specific Identifier
            Comments

            CDA Document Id extension and root.

            Control0..1
            TypeIdentifier
            Is Modifierfalse
            Summarytrue
            Requirements

            The structure and format of this Id shall be consistent with the specification corresponding to the formatCode attribute. (e.g. for a DICOM standard document a 64-character numeric UID, for an HL7 CDA format a serialization of the CDA Document Id extension and root in the form "oid^extension", where OID is a 64 digits max, and the Id is a 16 UTF-8 char max. If the OID is coded without the extension then the '^' character shall not be included.).

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            22. DocumentReference.identifier
            Definition

            Other identifiers associated with the document, including version independent identifiers.

            ShortOther identifiers for the document
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            TypeIdentifier
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. DocumentReference.status
            Definition

            The status of this document reference.

            Shortcurrent | superseded | entered-in-error
            Comments

            This is the status of the DocumentReference object, which might be independent from the docStatus element.

            This element is labeled as a modifier because the status contains the codes that mark the document or reference as not currently valid.

            Control1..1
            BindingThe codes SHALL be taken from DocumentReferenceStatus
            (required to http://hl7.org/fhir/ValueSet/document-reference-status)
            Typecode
            Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. DocumentReference.docStatus
            Definition

            The status of the underlying document.

            Shortpreliminary | final | amended | entered-in-error
            Comments

            The document that is pointed to might be in various lifecycle states.

            Control0..1
            BindingThe codes SHALL be taken from CompositionStatus
            (required to http://hl7.org/fhir/ValueSet/composition-status|4.0.1)

            Status of the underlying document.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            28. DocumentReference.type
            Definition

            Specifies the particular kind of document referenced (e.g. History and Physical, Discharge Summary, Progress Note). This usually equates to the purpose of making the document referenced.

            ShortKind of document (LOINC if possible)
            Comments

            Key metadata element describing the document that describes he exact type of document. Helps humans to assess whether the document is of interest when viewing a list of documents.

            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from IE Core Advance Directives Content Type
            (extensible to http://iehr.ai/fhir/ie/core/ValueSet/ie-core-advance-directives-content-type)

            Advance Directives Content Type

            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. DocumentReference.category
            Definition

            A categorization for the type of document referenced - helps for indexing and searching. This may be implied by or derived from the code specified in the DocumentReference.type.

            ShortCategorization of document
            Comments

            Key metadata element describing the the category or classification of the document. This is a broader perspective that groups similar documents based on how they would be used. This is a primary key used in searching.

            Control1..*
            BindingFor example codes, see DocumentClassValueSet
            (example to http://hl7.org/fhir/ValueSet/document-classcodes)

            High-level kind of a clinical document at a macro level.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Alternate Namesclaxs
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on DocumentReference.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • pattern @ $this
            • 32. DocumentReference.category:adi
              Slice Nameadi
              Definition

              A categorization for the type of document referenced - helps for indexing and searching. This may be implied by or derived from the code specified in the DocumentReference.type.

              ShortCategorization of ADI document"
              Comments

              Key metadata element describing the the category or classification of the document. This is a broader perspective that groups similar documents based on how they would be used. This is a primary key used in searching.

              Control0..*
              BindingThe codes SHALL be taken from IE Core Advance Healthcare Directive Categories Grouper
              (required to http://iehr.ai/fhir/ie/core/ValueSet/ie-core-advance-healthcare-directive-categories-grouper)

              Advance Healthcare Directive Categories Grouper. Note that other codes are permitted, see Required Bindings When Slicing by Value Sets

              TypeCodeableConcept
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              Alternate Namesclaxs
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. DocumentReference.subject
              Definition

              Who or what the document is about. The document can be about a person, (patient or healthcare practitioner), a device (e.g. a machine) or even a group of subjects (such as a document about a herd of farm animals, or a set of patients that share a common exposure).

              ShortWho/what is the subject of the document
              Control1..1
              TypeReference(IE Core Patient Profile, Practitioner, Group, Device)
              Is Modifierfalse
              Must Supporttrue
              Must Support TypesReference(IE Core Patient Profile)
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              36. DocumentReference.date
              Definition

              When the document reference was created.

              ShortWhen this document reference was created
              Comments

              Referencing/indexing time is used for tracking, organizing versions and searching.

              Control0..1
              Typeinstant
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Alternate Namesindexed
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              38. DocumentReference.author
              Definition

              Identifies who is responsible for adding the information to the document.

              ShortWho and/or what authored the document
              Comments

              Not necessarily who did the actual data entry (i.e. typist) or who was the source (informant).

              Control0..*
              TypeReference(IE Core Practitioner Profile, IE Core Organization Profile, IE Core Patient Profile, IE Core PractitionerRole Profile, IE Core RelatedPerson Profile, Device)
              Is Modifierfalse
              Must Supporttrue
              Must Support TypesReference(IE Core Practitioner Profile)
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              40. DocumentReference.authenticator
              Definition

              Which person or organization authenticates that this document is valid.

              ShortWho/what authenticated the document
              Comments

              Represents a participant within the author institution who has legally authenticated or attested the document. Legal authentication implies that a document has been signed manually or electronically by the legal Authenticator.

              Control0..1
              TypeReference(IE Core Practitioner Profile, IE Core Organization Profile, IE Core PractitionerRole Profile)
              Is Modifierfalse
              Must Supporttrue
              Must Support TypesReference(IE Core Practitioner Profile)
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              42. DocumentReference.custodian
              Definition

              Identifies the organization or group who is responsible for ongoing maintenance of and access to the document.

              ShortOrganization which maintains the document
              Comments

              Identifies the logical organization (software system, vendor, or department) to go to find the current version, where to report issues, etc. This is different from the physical location (URL, disk drive, or server) of the document, which is the technical location of the document, which host may be delegated to the management of some other organization.

              Control0..1
              TypeReference(Organization)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. DocumentReference.relatesTo
              Definition

              Relationships that this document has with other document references that already exist.

              ShortRelationships to other documents
              Comments

              This element is labeled as a modifier because documents that append to other documents are incomplete on their own.

              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              46. DocumentReference.relatesTo.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              48. DocumentReference.relatesTo.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              50. DocumentReference.relatesTo.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              52. DocumentReference.relatesTo.code
              Definition

              The type of relationship that this document has with anther document.

              Shortreplaces | transforms | signs | appends
              Comments

              If this document appends another document, then the document cannot be fully understood without also accessing the referenced document.

              Control1..1
              BindingThe codes SHALL be taken from DocumentRelationshipType
              (required to http://hl7.org/fhir/ValueSet/document-relationship-type|4.0.1)

              The type of relationship between documents.

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. DocumentReference.relatesTo.target
              Definition

              The target document of this relationship.

              ShortTarget of the relationship
              Control1..1
              TypeReference(DocumentReference)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. DocumentReference.description
              Definition

              Human-readable description of the source document.

              ShortHuman-readable description
              Comments

              What the document is about, a terse summary of the document.

              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Helps humans to assess whether the document is of interest.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              58. DocumentReference.securityLabel
              Definition

              A set of Security-Tag codes specifying the level of privacy/security of the Document. Note that DocumentReference.meta.security contains the security labels of the "reference" to the document, while DocumentReference.securityLabel contains a snapshot of the security labels on the document the reference refers to.

              ShortDocument security-tags
              Comments

              The confidentiality codes can carry multiple vocabulary items. HL7 has developed an understanding of security and privacy tags that might be desirable in a Document Sharing environment, called HL7 Healthcare Privacy and Security Classification System (HCS). The following specification is recommended but not mandated, as the vocabulary bindings are an administrative domain responsibility. The use of this method is up to the policy domain such as the XDS Affinity Domain or other Trust Domain where all parties including sender and recipients are trusted to appropriately tag and enforce.

              In the HL7 Healthcare Privacy and Security Classification (HCS) there are code systems specific to Confidentiality, Sensitivity, Integrity, and Handling Caveats. Some values would come from a local vocabulary as they are related to workflow roles and special projects.

              Control0..*
              BindingUnless not suitable, these codes SHALL be taken from All Security Labels
              (extensible to http://hl7.org/fhir/ValueSet/security-labels)

              Security Labels from the Healthcare Privacy and Security Classification System.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              Use of the Health Care Privacy/Security Classification (HCS) system of security-tag use is recommended.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              60. DocumentReference.content
              Definition

              The document and format referenced. There may be multiple content element repetitions, each with a different format.

              ShortDocument referenced
              Control1..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              62. DocumentReference.content.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              64. DocumentReference.content.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              66. DocumentReference.content.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              68. DocumentReference.content.attachment
              Definition

              The document and format referenced.

              ShortWhere to access the document
              Comments

              If there are multiple DocumentReference.content element repetitions, these SHALL all represent the same document in different format or attachment metadata. The content element SHALL NOT contain different versions of the same content. For version handling use multiple DocumentReferences with DocumentReference.relatesTo.

              Control1..1
              TypeAttachment
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ie-core-6: DocumentReference.content.attachment.url or DocumentReference.content.attachment.data or both SHALL be present. (url.exists() or data.exists())
              70. DocumentReference.content.attachment.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              72. DocumentReference.content.attachment.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on DocumentReference.content.attachment.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 74. DocumentReference.content.attachment.contentType
                Definition

                Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate.

                ShortMime type of the content, with charset etc.
                Control0..1
                BindingThe codes SHALL be taken from Mime Types
                (required to http://hl7.org/fhir/ValueSet/mimetypes|4.0.1)

                The mime type of an attachment. Any valid mime type is allowed.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summarytrue
                Requirements

                Processors of the data need to be able to know how to interpret the data.

                Example<br/><b>General</b>:text/plain; charset=UTF-8, image/png
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                76. DocumentReference.content.attachment.language
                Definition

                The human language of the content. The value can be any valid value according to BCP 47.

                ShortHuman language of the content (BCP-47)
                Control0..1
                BindingThe codes SHOULD be taken from CommonLanguages
                (preferred to http://hl7.org/fhir/ValueSet/languages)

                A human language.

                Additional BindingsPurpose
                AllLanguagesMax Binding
                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Users need to be able to choose between the languages in a set of attachments.

                Example<br/><b>General</b>:en-AU
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                78. DocumentReference.content.attachment.data
                Definition

                The actual data of the attachment - a sequence of bytes, base64 encoded.

                ShortData inline, base64ed
                Comments

                The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON.

                Control0..1
                This element is affected by the following invariants: ie-core-6
                Typebase64Binary
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summaryfalse
                Requirements

                The data needs to able to be transmitted inline.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                80. DocumentReference.content.attachment.url
                Definition

                A location where the data can be accessed.

                ShortUri where the data can be found
                Comments

                If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data.

                Control0..1
                This element is affected by the following invariants: ie-core-6
                Typeurl
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summarytrue
                Requirements

                The data needs to be transmitted by reference.

                Example<br/><b>General</b>:http://www.acme.com/logo-small.png
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                82. DocumentReference.content.attachment.size
                Definition

                The number of bytes of data that make up this attachment (before base64 encoding, if that is done).

                ShortNumber of bytes of content (if url provided)
                Comments

                The number of bytes is redundant if the data is provided as a base64binary, but is useful if the data is provided as a url reference.

                Control0..1
                TypeunsignedInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Representing the size allows applications to determine whether they should fetch the content automatically in advance, or refuse to fetch it at all.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                84. DocumentReference.content.attachment.hash
                Definition

                The calculated hash of the data using SHA-1. Represented using base64.

                ShortHash of the data (sha-1, base64ed)
                Comments

                The hash is calculated on the data prior to base64 encoding, if the data is based64 encoded. The hash is not intended to support digital signatures. Where protection against malicious threats a digital signature should be considered, see Provenance.signature for mechanism to protect a resource with a digital signature.

                Control0..1
                Typebase64Binary
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Included so that applications can verify that the contents of a location have not changed due to technical failures (e.g., storage rot, transport glitch, incorrect version).

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                86. DocumentReference.content.attachment.title
                Definition

                A label or set of text to display in place of the data.

                ShortLabel to display in place of the data
                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Applications need a label to display to a human user in place of the actual data if the data cannot be rendered or perceived by the viewer.

                Example<br/><b>General</b>:Official Corporate Logo
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                88. DocumentReference.content.attachment.creation
                Definition

                The date that the attachment was first created.

                ShortDate attachment was first created
                Control0..1
                TypedateTime
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                This is often tracked as an integrity issue for use of the attachment.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                90. DocumentReference.content.format
                Definition

                An identifier of the document encoding, structure, and template that the document conforms to beyond the base format indicated in the mimeType.

                ShortFormat/content rules for the document
                Comments

                Note that while IHE mostly issues URNs for format types, not all documents can be identified by a URI.

                Control0..1
                BindingUnless not suitable, these codes SHALL be taken from HL7 ValueSet of Format Codes for use with Document Sharing
                (extensible to http://terminology.hl7.org/ValueSet/v3-HL7FormatCodes)
                TypeCoding
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                92. DocumentReference.context
                Definition

                The clinical context in which the document was prepared.

                ShortClinical context of document
                Comments

                These values are primarily added to help with searching for interesting/relevant documents.

                Control0..1
                TypeBackboneElement
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                94. DocumentReference.context.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                96. DocumentReference.context.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                98. DocumentReference.context.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                100. DocumentReference.context.encounter
                Definition

                Describes the clinical encounter or type of care that the document content is associated with.

                ShortContext of the document content
                Control0..*
                TypeReference(Encounter, EpisodeOfCare)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                102. DocumentReference.context.event
                Definition

                This list of codes represents the main clinical acts, such as a colonoscopy or an appendectomy, being documented. In some cases, the event is inherent in the type Code, such as a "History and Physical Report" in which the procedure being documented is necessarily a "History and Physical" act.

                ShortMain clinical acts documented
                Comments

                An event can further specialize the act inherent in the type, such as where it is simply "Procedure Report" and the procedure was a "colonoscopy". If one or more event codes are included, they shall not conflict with the values inherent in the class or type elements as such a conflict would create an ambiguous situation.

                Control0..*
                BindingFor example codes, see v3 Code System ActCode
                (example to http://terminology.hl7.org/ValueSet/v3-ActCode)

                This list of codes represents the main clinical acts being documented.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                104. DocumentReference.context.period
                Definition

                The time period over which the service that is described by the document was provided.

                ShortTime of service that is being documented
                Control0..1
                TypePeriod
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                106. DocumentReference.context.facilityType
                Definition

                The kind of facility where the patient was seen.

                ShortKind of facility where patient was seen
                Control0..1
                BindingFor example codes, see FacilityTypeCodeValueSet
                (example to http://hl7.org/fhir/ValueSet/c80-facilitycodes)

                XDS Facility Type.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                108. DocumentReference.context.practiceSetting
                Definition

                This property may convey specifics about the practice setting where the content was created, often reflecting the clinical specialty.

                ShortAdditional details about where the content was created (e.g. clinical specialty)
                Comments

                This element should be based on a coarse classification system for the class of specialty practice. Recommend the use of the classification system for Practice Setting, such as that described by the Subject Matter Domain in LOINC.

                Control0..1
                BindingFor example codes, see PracticeSettingCodeValueSet
                (example to http://hl7.org/fhir/ValueSet/c80-practice-codes)

                Additional details about where the content was created (e.g. clinical specialty).

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                This is an important piece of metadata that providers often rely upon to quickly sort and/or filter out to find specific content.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                110. DocumentReference.context.sourcePatientInfo
                Definition

                The Patient Information as known when the document was published. May be a reference to a version specific, or contained.

                ShortPatient demographics from source
                Control0..1
                TypeReference(Patient)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                112. DocumentReference.context.related
                Definition

                Related identifiers or resources associated with the DocumentReference.

                ShortRelated identifiers or resources
                Comments

                May be identifiers or resources that caused the DocumentReference or referenced Document to be created.

                Control0..*
                TypeReference(Resource)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))